OUT OF RANGE PROBLEM IN WINDOWS 7

Generally this problem "OUT OF RANGE Displayed on the scree when you start the computer" problem comes under windows 7 OS,when we installing or any other time,if you get this problem, then first we need to know why this problem comes.


This problem comes because of resolution setting that is some monitor can not support some resolutions and that with windows 7 this will cause system to display "OUT OF RANGE" message is display when you start the computer, to solve this problem we have two solutions according to the problem

problem 1:

If the "Out Of Range " message is displaying on scree ,if scree allows to boot from safe mode then that time just start with safe mode ( to start system in safe mode you need to press F8 key after the screen goes blank for the first time, or after the BIOS post ends, start taping the F8 key repeatedly. ) by this process you log in to your system and change the resolution, save it and start in normal way problem is solved.

Problem 2:

if the system dose not permit you to start the system in safe mode you just change the monitor for few minutes(or else you can carry your CPU with to your friend's home and connect to his monitor) now start the system and change the resolution to normal now connect with your monitor problem solved.

TIPS AND TRICKS FOR NOKIA MBILES

Hello guys try this your own because some will work on some mobile some are not because i worked with this on different mobiles of Nokia.

* *3370# This Nokia code activates Enhanced Full Rate Codec (EFR) – Your Nokia cell phone uses the best sound quality but talk time is reduced my approx. 5%

* #3370# Deactivate Enhanced Full Rate Codec (EFR) .

* *#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type

* 12345 This is the default security code .

* *#06# For checking the International Mobile Equipment Identity (IMEI Number) . This can be used with almost every Mobile Phone i.e Samsung, SE, LG etc.

* *#4720# Activate Half Rate Codec – Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.

* *#4720# With this Nokia code you can deactivate the Half Rate Codec.

* *#9999# Phones software version if *#0000# does not work.

* #pw+1234567890+1# Provider Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols).

* #pw+1234567890+2# Network Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols) .

* #pw+1234567890+3# Country Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols).

* #pw+1234567890+4# SIM Card Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols) .

* *#147# This lets you know who called you last (Only vodofone).

* *#1471# Last call (Only vodofone) .

* *#21# This phone code allows you to check the number that “All Calls” are diverted to.

* *#2640# Displays phone security code in use .

* *#30# Lets you see the private number.

* *#43# Allows you to check the “Call Waiting” status of your cell phone.

* *#61# Allows you to check the number that “On No Reply” calls are diverted to .

* *#62# Allows you to check the number that “Divert If Unreachable (no service)” calls are diverted to .

* *#67# Allows you to check the number that “On Busy Calls” are diverted to

* *#67705646# Phone code that removes operator logo on 3310 & 3330

* *#73# Reset phone timers and game scores.

* *#746025625# Displays the SIM Clock status, if your phone supports this power saving feature “SIM Clock Stop Allowed”, it means you will get the best standby time possible .

* *#7760# Manufactures code.

* *#7780# Restore factory settings. With Some Models *#7370#

* *#8110# Software version for the nokia 8110.

* *#92702689# Displays – 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again.

* *#94870345123456789# Deactivate the PWM-Mem.

* **21*number# Turn on “All Calls” diverting to the phone number entered.

* **61*number# Turn on “No Reply” diverting to the phone number entered .

* **67*number# Turn on “On Busy” diverting to the phone number entered .

* press and hold # Lets you switch between lines.

Remove Shortcut from Pen Drive

Click on “Start” –>Run –> type cmd and click on OK
Here I assume your pen drive letter as M:
Enter this command.
attrib -h -r -s /s /d M:\*.*
You can copy the above command –> Right-click in the Command Prompt and paste it.
Note: Don’t forget to replace the letter "M" with your pen drive letter.
Now press “Enter”.
Now check for your files and folder in Pen Drive.

How To Install WindowsXP/Vista/7 From Pendrive....? or How to Make Pendrive as Bootable...?

If there is no CD/DVD drive to write a .ISO(image) file then at that time you can write your image file to pen drive that is making pen drive as boot able drive ,now from pen drive you can format your system and install windows XP/Vista/7 in your system it is very easy process shown below.

1. Take a minimum 2GB pen drive
2. Download solution.zip file from this location http://computernetworkingnotes.com/tips_and_tricks/xp/download/solution.zip
3. Extract all file from .ISO file one folder name it as XPfiles

Now follow the steps:

We first have to make pen drive boot able and need to put all necessary files in it. To do this go on a running computer which have working CD – ROM.

Extract the solution.rar file and from them run the HpUSBformat.exe.
now in device field select the pen drive from thelist
file system as FAT32
Volume Label as :SYSTEM
Check marks on : Create a DOS Start up disk
Select radio button : Using DOS system files located at
Give the path where you have extracted solution.rar from them select DOS folder and give path for dos folder.
now press start button
now you have got an USB disk with bootable DOS system on it.
Copy all other files from DOS folder to your USB disk. ( you can overwrite existing ones)
Now copy all files of XPfiles (extracted file from .ISO)

Now you have a bootable pen drive with xp.


Boot your laptop with previously prepared USB drive ( if you have problems, just check your BIOS or try to access boot menu, DEL? F10? F11?. In bios set first boot to removable media.)And follow these nine easy step to install xp.

Step1:- When system is booted up, and you see command prompt, type sys d: and hit enter if you see system transferred - you have luck, FAT32 file system is on drive C:, you will not lose your data
- go to step 5
- if any problem appears go to step 2

Step2:-REMEMBER, you will loose all data from drive C:/> - when system is booted up from USB, your drive C: appears as D:

Step3:- Type format d:/q/s to format drive D:
accept and when it is finished, go to step 5 ( you are lucky, you don't need to make partitions)
otherwise go to step 4

Step4:- Type fdisk and hit enter
create new partition ( after restart boot with pendrive in)
go to step 3 and format the partitions and come back here :)
type pqmagic and set your new partition active
( physical drive 2, Advanced A, set Active - S, are you sure - Y, Exit - X )

Step5:-Type nc and hit enter, and using Norton Commander, copy all files form pendrive to disk C: ( you can overwrite existing ones)

Step6:-Restart Laptop without pen drive in it (it should start from hard drive)

Step7:-Type cd i386 and hit enter (it will enter i386 folder)

Step8:-Type winnt and hit enter

Step9:-this will launch xp installation process and you can install xp as you do with cd.

Removing NewFolder.exe Virus

NewFolder.exe is Trogan Virus Which will replicate itself.it is mostly effected by the removable devices like flash drivers to remove this virus you can use some tools there are no of toos provided in the internet but ComboFix is the best tool to remove this is the fist and easy method.

This is link to download combofix toolhttp://www.infospyware.net/antimalware/combofix

The second method is manual removal this is the best method if we don't have the internet and it will removes the virus permanently

Step1: Delete the Autorun.inf and other suspicious exe files from your pen drive using this method.

Step2: Open Windows Task Scheduler or go to Control Panel –>Scheduled tasks and remove any suspicious task

Step3: Click on Start –> run and type –> ‘msconfig’. In the startup tab, find entries like “NewFolder.exe” or “regsvr.exe” and uncheck them.

Step4: Open Task Manager. In the processes tab, delete any process with the name of NewFolder.exe or regsvr.exe

Step5: Open Registry by typing ‘Regedit’ in the Run command box. Please take a backup of the registry before proceeding. Now search for “regsvr.exe” and “Newfolder.exe” . If you find any entries, delete them. Please delete the entries having the exact name as “regsvr.exe” and not anything else. If that is appended with other entries, delete its occurrence only and not the whole thing.

Step6: Restart the Computer